cooling tower

The grid fill is the result of an extensive optimization of the lath width, the blockage area ratio and the lath layout; The water droplets, splashing on a well drained lath, break in a large number of very small droplets, inducing large heat exchange surface. Blockage area ratio and lozenge layout is the optimized compromise between the pressure drop and the probability of large droplets to hit the laths. The laths height has been selected to transfer the load to the supporting spacers using minimum material quantity. It may be used as well in Counterflow as in Crossflow cooling towers, mechanical or natural draft. It is well adapted to any water quality, even without water treatment, when the fouling risk cannot be determined, in particular with seawater

This BAC CF1200 New Type Non-Glued Conter Flow Cooling Tower Fills is used in: - TSS is less than 100 PPM with good microbiological control (less than 25PPM where microbiological control is poor); - Make-up from uncontaminated sources - Water treatment using oxidizing biocides & scale inhibitors - Low cycles of concentration - Minimal airborne dust - No potential for oil or grease contamination

Spiral Target Cross Flow Cooling Tower Spray Nozzle is made by PP material, and assembled by several parts. It is widely used for the counterflow cooling tower. Spiral Target Cross Flow Cooling Tower Spray Nozzle help ensure a uniformly delivery of water over the cooling tower fill. Uniform water distribution at the top of the cooling tower fill is essential to achieve proper wetting of the entire cooling tower infill surface.

Spiral Target Cross Flow Cooling Tower Spray Nozzle is made by PP material, and assembled by several parts. It is widely used for the counterflow cooling tower. Spiral Target Cross Flow Cooling Tower Spray Nozzle help ensure a uniformly delivery of water over the cooling tower fill. Uniform water distribution at the top of the cooling tower fill is essential to achieve proper wetting of the entire cooling tower infill surface.

Industrial Cooling Tower is widely used in industries of Electric Power, Petroleum, Chemical Engineering, Chemical Fertilizer, Smelt, etc. Cooling water capacity ranges from 800 m3/h - 4000 m3/h. According to Customers' request, we also supply high temperature type, sewage type, and also designed to different shape to match with the customer's site location.

Industrial Cooling Tower is widely used in industries of Electric Power, Petroleum, Chemical Engineering, Chemical Fertilizer, Smelt, etc. Cooling water capacity ranges from 800 m3/h - 4000 m3/h. According to Customers' request, we also supply high temperature type, sewage type, and also designed to different shape to match with the customer's site location.

Cross Cooling Tower PVC Filling Material plays a crucial role in improving the lifespan of the cross flow cooling tower. It also could increases the water flow process remarkably for better performance and efficiency as well. This cross flow cooling tower PVC filling material is glued together by A type and B type sheets to be a block which is stalled in tower. This PVC fill use the modified PVC sheet and is manufactured with a unique modified formula to enable strong resistance and guarantee its durability. It involves special processing whereby the inner side edge is integrated with a liquid baffle plate which controls the drift loss of water.

This Cooling Tower Rectangular Mist Eliminator is constructed from preformed rigid PVC sheets, subsequently made up into blocks. It is widely used in the evaporative towers, scrubbers and gas turbines. Because of the best quality for the PVC raw material, this mist eliminator is resistance to the environmental effects (such as UV radiation). Due to the handy form, this mist eliminator is easy for the installment and maintance. And this mist eliminator is easy to been installed by any size, such as the round one. Mist Eliminator function is remove entrained particles from airflow steam efficiently, with the minimum pressure drop,thereby reducing the fan power requirement when the air passes through the Mist Eliminator.

Cooling Tower NS6 Spray Nozzle is suit for Marley counterflow cooling towers. It it is an other type of the Marley brand cooling tower nozzle which is a little same to NS5 cooling tower nozzle, and can replace the NS5 cooling tower nozzle. This cooling tower NS6 spray nozzle is made by PP material, which is suitable for the high temperature.