-
Hot
FRP Louver
FRP Louver is wave shape board, the angle for the louver and horizontal is about 45°, and the width of louver depends on the designed height of the air inlet shutter. FRP louver can avoid splashing water effectively, speed uo the air flow, and in the mean while it can reduce outside dust and debris flow into the cooling tower. The width ,length,color and thickness could be customized based on detailed request.
Send Email Details -
Cooling Tower FRP Parts
Cooling Tower FRP Parts included FRP round/square tubes,FRP rods,FRP I/H beam,FRP angles all kinds of FRP sections. All these FRP parts is made by fiber glass and resin with the extruding device. They could been used in the structure of the cooling tower. The advantage for FRP part is light weight, high strength, Corrosion resistant,Chemical resistant,Humidity resistant. Latino could supply what you need!
Send Email Details -
Fiberglass Structural Shapes
FRP Molded Grating is specially designed by LATINO's engineers. It is an integral fiberglass reinforced polyester or vinyl ester grating with standard panels and sizes. It was manufactured by interweaving, continuous and thoroughly-wetted E-Glassfiberglass roving using thermosetting resins. Its application is floor,walkways, operation platforms, stair treads, trench covers, catwalks, car wah,scaffold,bridges, etc. Latino's FRP Molded Grating is with the integral structures, longservice time and anti-skid top surface to make the grating of an ideal choice inmany industries, especially for the big cooling tower.
Send Email Details -
GRP Pipe
GRP pipe have high strength in lengthwise (LW) and crosswise (CW) and satisfy with the relevant Europe standards. GRP Pipe used widely in domestic and overseas in cooling tower, power industries. It could used as the structure and distribution pipes. GRP pipes's adantage is high temperature resistance, anti-corrosion, high strength, small specific gravity, low moisture absorption, small extension and good insulation,etc.
Send Email Details -
Hot
FRP Channel
FRP Channel is used for the ladder handrail and frame strucute for the cooling tower or any other construction. It can resist the ageing and the ultraviolet effectively. Comparing with the normal iron part and Alu part, the FRP channel is light weight, tightness and anti-corrosion. The size, shape, length and color could been customized according to the client's request.
Send Email Details -
Fan Deck
Fan Deck is used in the top of the cooling tower. It is made by FRP material with the extruding device. It is high-strenght, durable and anti-corrosion. For the FRP cooling tower, the cooling tower fan stack usually is intalled on the fan deck. The shape, size and color could been customized. If necessary, Latino could send our engineers to your site to design for you.
Send Email Details -
FRP Manufactured Profiles
FRP Louver is a kind of wave shape board, the width and thickness of louver depends on the designed height of the air inlet shutter, and the angle for the louverc is about 45°, and . FRP louver can avoid the splashing water effectively, and speed up the air flow, and in the same time it can decrease the outside dust and debris flow into the cooling tower. The width ,length,color and thickness could be customized according to the detailed request.
Send Email Details -
Cooling Tower FRP Component
FRP U Beam is the constant cross-section structure by a pultrusion process using fiberglass reinforcements with thermosetting resin matrixes.FRP U Beam is one of the Pultruded FRP profile. The other pultruded FRP profileS include FRP Angle,Square Tube,Round tube,FRP Recup,Wide flange beams,H beam, Round Rods,Kick plates,Solid plates. etc. They could instead of the steel products, and the weight is light, anti-rust and easy for cutting.
Send Email Details
