FRP Profile

  • FRP Component

    FRP Component

    FRP Component, including the GRP pipe, it is high strength in lengthwise (LW) and crosswise (CW) and produced according to the relevant Europe standards.

    They are used widely in domestic and overseas in cooling tower, power industries and any other proper construction. It could used as the structure and distribution pipes for the cooling tower industry.

    GRP pipes's adantage is high temperature resistance, anti-corrosion, high strength, small specific gravity, low moisture absorption, small extension and good insulation,etc.

    Email Details
  • FRP Beams

    FRP Beams

    FRP H Beam is the constant cross-section structure by a pultrusion process using fiberglass reinforcements with thermosetting resin matrixes.FRP H Beam is one of the Pultruded FRP profile.

    The other pultruded FRP profile include FRP Angle,Square Tube,Round tube,FRP Recup,Wide flange beams,U-Channel, Round Rods,Kick plates,Solid plates. etc.

    They could instead of the steel products, and the weight is light and easy for cutting.

    Email Details
  • FRP Parts

    FRP Parts

    FRP part have a lot of kinds, such as FRP round pipe, FRP square tube,FRP rectangular pipe, glass FRP round bar, FRP H beam,FRP I beam, FRP recup and FRP angle profile, FRP fan deck, etc.

    The basic material for prodcuing FRP part is resin and fiber glass. So it is high temperature resistance, anti-corrosion, high strength,anti-acid and anti-alkali.

    FRP part is used as ladder material, structure for the cooling tower or other proper construction. For more details, please kindly contact us, our engineer could reply all your confusions.

    Email Details
  • FRP Cooling Tower Filler

    FRP Cooling Tower Filler

    FRP grating is made by the glass fiber reinforced material and unsaturated polyester resin.

    Comparing with other floor materials, FRP Cooling Tower Filler provides lots of benefits, unmatched impact resistance, while the strength-weight-ratio is 1/4 of that of the steel grating. FRP Cooling Tower Filler is easy to been cut and installed.

    Best quality resins being used include Orthophthalic, Polyester resin, Vinyl ester resin, Isophthalic polyester. And the Vinyl ester grating provides extremely highly corrosion resistance.

    Email Details
  • FRP Structural Members

    FRP Structural Members

    Fan Deck is one of the FRP Structural Members, it is used in the top of the cooling tower. It is made by FRP material with the extruding device. It is high-strenght, durable and anti-corrosion.

    For the FRP cooling tower, the cooling tower fan stack usually is intalled on the fan deck.

    The shape, size and color could been customized. If necessary, Latino could send our engineers to your site to design for you.

    Email Details
  • Hot
    FRP Channel

    FRP Channel

    FRP Channel is used for the ladder handrail and frame strucute for the cooling tower or any other construction. It can resist the ageing and the ultraviolet effectively.

    Comparing with the normal iron part and Alu part, the FRP channel is light weight, tightness and anti-corrosion.

    The size, shape, length and color could been customized according to the client's request.

    Email Details
  • FRP Pultruded Sections

    FRP Pultruded Sections

    FRP Pultruded Section is the manufacturing process for producing the continuous lengths of reinforced polymer structural shapes with the constant cross-sections. The raw materials are a mixed liquid resin (including resin, fillers and specialized additives) with flexible textile reinforcing fibers. The process is pull these raw materials by a heated steel forming die using a special continuous pulling device.

    The FRP Pultruded Section are in continuous forms, such as the rolls of fiberglass mat and doffs of fiberglass roving. As the reinforcements are been saturated with the resin mixture in the resin bath and pulled through the die, the gelation, or hardening, of the resin is initiated by the heat from the die and a rigid, cured profile is formed that bsed on the shape of the die.

    Email Details
  • Fan Deck

    Fan Deck

    Fan Deck is used in the top of the cooling tower. It is made by FRP material with the extruding device. It is high-strenght, durable and anti-corrosion.

    For the FRP cooling tower, the cooling tower fan stack usually is intalled on the fan deck.

    The shape, size and color could been customized. If necessary, Latino could send our engineers to your site to design for you.

    Email Details
  • Cooling Tower FRP Parts

    Cooling Tower FRP Parts

    Cooling Tower FRP Parts included FRP round/square tubes,FRP rods,FRP I/H beam,FRP angles all kinds of FRP sections. All these FRP parts is made by fiber glass and resin with the extruding device.

    They could been used in the structure of the cooling tower. The advantage for FRP part is light weight, high strength, Corrosion resistant,Chemical resistant,Humidity resistant.

    Latino could supply what you need!

    Email Details
  • 1
  • 2
  • 3
  • >
  • Total 24 Records
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy