-
Hot
Fan stack cooling tower
Fan Stack cooling tower is produced by the water-resistance resin and high quality fiberglass reinforcement with hand lay-up method.
Send Email Details
The fan stacks cooling tower is consist with belled inlets, fan rings. Depending on the height, conical, diverging exits for reduced air pressure drop losses and pressure recovery to improve the fan efficiency. Vibrations are low because of the thick walls and stiffening ribs.
Latino could supply the customized fan stack according to your requirement with best quality. -
SMC Mould Cooling Tower Fan Stack
Molded SMC Fan Stack, beautiful appearance, smooth surface, low wind resistance
Send Email Details
High production efficiency
Standardized fan stack, easy to install and greatly reduced installation time
Environmental Friendly comparing with traditional hand paste fan stacks, protects workers' health and little scraps -
OEM Hand Lay-up Fan Ring For Cooling Towers
OEM Hand Lay-up Fan Ring For Cooling Towers manufactured by LATINO Company of Polymer and Composite/Fiberglass Materials is made up of 100% fiberglass reinforced polyester laminates and has a two-layer design.
Send Email Details
The smooth interior surface of the fan fiberglass Cooling Tower FRP/SMC fan stack is very suitable for fast air travel with minimal friction, airflow, and minimal turbulence. The outer surface of the fan stack is very robust so that it can withstand extreme weather conditions, fire, UV rays, and cooling towers.
The cylindrical shape of the Fiberglass cooling tower FRP/SMC fan stack produced by LATINO Company reduces noise and vibration for the fan itself and the entire cooling tower. -
Fan Ring
Fan ring is made of FRP material. Because the internal and external fan stack and fan ring surfaces are smooth and shiny, so it could improve the air flow parameters and keep the fan stack clean when operating.
Send Email Details
The fan stacks cooling tower is consist with belled inlets, fan rings. Depending on the height, conical, diverging exits for reduced air pressure drop losses and pressure recovery to improve the fan efficiency. Vibrations are low because of the thick walls and stiffening ribs.
Latino could supply the customized fan stack according to your requirement with best quality. -
Hand Lay-up Fan Cylinder
Hand Lay-up Fan cylinder is made of FRP material. Because the internal and external fan stack and fan ring surfaces are smooth and shiny, so it could improve the air flow parameters and keep the fan stack clean when operating.
Send Email Details
The fan stacks cooling tower is consist with belled inlets, fan rings. Depending on the height, conical, diverging exits for reduced air pressure drop losses and pressure recovery to improve the fan efficiency. Vibrations are low because of the thick walls and stiffening ribs.
Latino could supply the customized fan stack according to your requirement with best quality. -
Cooling Tower Fan Ring FRP Fan Stack
Molded Fiberglass Cooling Tower FRP/SMC Fan Stacks manufactured by LATINO Company of Polymer and Composite/Fiberglass Materials is made up of 100% fiberglass reinforced polyester laminates and has a two-layer design.
Send Email Details
The smooth interior surface of the fan fiberglass Cooling Tower FRP/SMC fan stack is very suitable for fast air travel with minimal friction, airflow, and minimal turbulence. The outer surface of the fan stack is very robust so that it can withstand extreme weather conditions, fire, UV rays, and cooling towers.
The cylindrical shape of the Fiberglass cooling tower FRP/SMC fan stack produced by LATINO Company reduces noise and vibration for the fan itself and the entire cooling tower. -
Hot
Customerized Hand-Lay Up Cooling Tower Fan Ring FRP Fan Stack
Molded Fiberglass Cooling Tower FRP/SMC Fan Stacks manufactured by LATINO Company of Polymer and Composite/Fiberglass Materials is made up of 100% fiberglass reinforced polyester laminates and has a two-layer design.
Send Email Details
The smooth interior surface of the fan fiberglass Cooling Tower FRP/SMC fan stack is very suitable for fast air travel with minimal friction, airflow, and minimal turbulence. The outer surface of the fan stack is very robust so that it can withstand extreme weather conditions, fire, UV rays, and cooling towers.
The cylindrical shape of the Fiberglass cooling tower FRP/SMC fan stack produced by LATINO Company reduces noise and vibration for the fan itself and the entire cooling tower. -
Air-Cooled Condensers Fan Stack
The Air-Cooled Condensers Fan Stack is made by two method, hand lay-up and and SMC. You could choose these two different producing method based on your requirement. For these two methods, the final effect is the same.
Send Email Details
The hand lay-up method is glue the water-resistance resin with the high quality fiberglass reinforcement by hand. So it is durable.
For the SMC method, the FRP fan stack is produced by mould. The production time is shorter than hand lay-up. And the price is lower too. -
Hot
FRP Fan Stack
FRP fan stack is made by two method, hand lay-up and and SMC. You could choose these two different producing method based on your requirement. For these two methods, the final effect is the same.
Send Email Details
The hand lay-up method is glue the water-resistance resin with the high quality fiberglass reinforcement by hand. So it is durable.
For the SMC method, the FRP fan stack is produced by mould. The production time is shorter than hand lay-up. And the price is lower too. -
Hot
Fiberglass Fan Stack
Fiberglass fan stack is oval, belongs to kinetic energy recovery type. It was made by hand lay-up method.
Send Email Details
The fan stacks cooling tower is consist with belled inlets, fan rings. Depending on the height, conical, diverging exits for reduced air pressure drop losses and pressure recovery to improve the fan efficiency. Vibrations are low because of the thick walls and stiffening ribs. -
Hot
ACC Fan stack Cooling Tower
ACC Fan stack cooling tower is oval, belongs to kinetic energy recovery type. It was made by hand lay-up method.
Send Email Details
The fan stacks cooling tower is consist with belled inlets, fan rings. Depending on the height, conical, diverging exits for reduced air pressure drop losses and pressure recovery to improve the fan efficiency. Vibrations are low because of the thick walls and stiffening ribs.