-
Condenser Spray Nozzles For Cooling Tower
Latino's cooling tower nozzles ensure hot water distribution is uniform over the cooling tower fill blocks. These cooling tower nozzles are high-temperature resistant and non-clogging designed. Removing and replacing is relatively simple and does not need to stop the regular work for the cooling tower. Uniform distribution of water is the main factor for maintaining the cooling tower efficiency. This cooling tower nozzle is assebled by nozzle bodyã€adaptor and orifice. All these three components are made from PP material. You could choose the suitable orifice depend on requirement.
Send Email Details -
Counterflow Sprayer Nozzle
This counterflow sprayer nozzle is made by ABS material. It is suitable for the counterflow cooling tower. The hot water flowing inside of the coils, which is enwrapped by outside water. The heat of water is transferred by coil when meet the outside water and air.The heat is been exhausted out of the cooling tower by the fan in the top of the cooling tower. And the water is collected back to the tank in the bottom of the cooling tower and will circulate continuously. This counterflow sprayer nozzle can distribute the water uniformly into the cooling tower fill and non-clogging.
Send Email Details -
Hot
Spiral Cooling Tower Spray Nozzle
Factory Price And Spiral Cooling Tower Spray Nozzle is widely used in the cooling tower. This cooling tower PP spray nozzle is assembled by three parts, nozzle body, adaptor and orifice. And this cooling tower nozzle connected with the distribution pipe by the adaptor with thread. Latino could supply lots size of cooling tower spray nozzle to meet with different requirement for the cooling towers.
Send Email Details -
Hot
Cooling Tower Water Sprinkler Spray Nozzle
The Cooling Tower Water Sprinkler Spray Nozzle is made from ABS material, and assembled by several parts. The water flow from the distribution pipes to the coils and meet with the below plate, unformly distribute the water into the cooling tower fill. High cooling effect and non-clogging.
Send Email Details -
Cooling Tower Spray Nozzle Manufacturer
This cooling tower spray nozzle is assembled by the nozzle body、orifice and the adaptor. You could choose the orifice and adaptor according to your request. This nozzle was connected with the distribution pipes by the stainless screw, its quality is durable.
Send Email Details -
Hot
Rotating PP Spray Nozzle For Water Cooling Tower
Rotating PP Spray Nozzle For Water Cooling Tower is widely used in the cooling tower. This cooling tower PP spray nozzle is assembled by three parts, nozzle body, adaptor and orifice. And this cooling tower nozzle connected with the distribution pipe by the adaptor with thread. Latino could supply lots size of cooling tower spray nozzle to meet with different requirement for the cooling towers.
Send Email Details -
Hot
Cooling Tower NS6 Spray Nozzle
Cooling Tower NS6 Spray Nozzle is suit for Marley counterflow cooling towers. It it is an other type of the Marley brand cooling tower nozzle which is a little same to NS5 cooling tower nozzle, and can replace the NS5 cooling tower nozzle. This cooling tower NS6 spray nozzle is made by PP material, which is suitable for the high temperature.
Send Email Details -
Reflection Type Cooling Tower Spray Nozzle For Counter Flow Cooling Tower
This cooling towers spray nozzle is an efficient, non-clogging nozzle designed specifically for all counter flow cooling tower applications. This cooling tower nozzle is made by PP+ fiberglass, so it is high-temperature resistance and durable. This cooling tower sprayer have varius size of orifice and adapetor to suit all kinds of flowing request of cooling towers.
Send Email Details