FRP component
  • Hot
    FRP Louver

    FRP Louver

    FRP Louver is wave shape board, the angle for the louver and horizontal is about 45°, and the width of louver depends on the designed height of the air inlet shutter. FRP louver can avoid splashing water effectively, speed uo the air flow, and in the mean while it can reduce outside dust and debris flow into the cooling tower. The width ,length,color and thickness could be customized based on detailed request.

    Send Email Details
  • Cooling Tower FRP Parts

    Cooling Tower FRP Parts

    Cooling Tower FRP Parts included FRP round/square tubes,FRP rods,FRP I/H beam,FRP angles all kinds of FRP sections. All these FRP parts is made by fiber glass and resin with the extruding device. They could been used in the structure of the cooling tower. The advantage for FRP part is light weight, high strength, Corrosion resistant,Chemical resistant,Humidity resistant. Latino could supply what you need!

    Send Email Details
  • Fiberglass Structural Shapes

    Fiberglass Structural Shapes

    FRP Molded Grating is specially designed by LATINO's engineers. It is an integral fiberglass reinforced polyester or vinyl ester grating with standard panels and sizes. It was manufactured by interweaving, continuous and thoroughly-wetted E-Glassfiberglass roving using thermosetting resins. Its application is floor,walkways, operation platforms, stair treads, trench covers, catwalks, car wah,scaffold,bridges, etc. Latino's FRP Molded Grating is with the integral structures, longservice time and anti-skid top surface to make the grating of an ideal choice inmany industries, especially for the big cooling tower.

    Send Email Details
  • GRP Pipe

    GRP Pipe

    GRP pipe have high strength in lengthwise (LW) and crosswise (CW) and satisfy with the relevant Europe standards. GRP Pipe used widely in domestic and overseas in cooling tower, power industries. It could used as the structure and distribution pipes. GRP pipes's adantage is high temperature resistance, anti-corrosion, high strength, small specific gravity, low moisture absorption, small extension and good insulation,etc.

    Send Email Details
  • Hot
    Fiberglass Grating

    Fiberglass Grating

    Fiberglass Grating is made of thoroughly wetted continuous glass strand fibers and a special resin which provides the maximum corrosion resistance to chemicals. Surface: flat,concave,sanding,covered and so on. Fiberglass Grating is widely used in the cooling tower, oil industry, power engineering, water & waste water treatment as working floor, stair tread, trench cover, etc. It is an ideal loading frame for corrosion circumstances.

    Send Email Details
  • FRP Component

    FRP Component

    FRP Component, including the GRP pipe, it is high strength in lengthwise (LW) and crosswise (CW) and produced according to the relevant Europe standards. They are used widely in domestic and overseas in cooling tower, power industries and any other proper construction. It could used as the structure and distribution pipes for the cooling tower industry. GRP pipes's adantage is high temperature resistance, anti-corrosion, high strength, small specific gravity, low moisture absorption, small extension and good insulation,etc.

    Send Email Details
  • FRP Parts

    FRP Parts

    FRP part have a lot of kinds, such as FRP round pipe, FRP square tube,FRP rectangular pipe, glass FRP round bar, FRP H beam,FRP I beam, FRP recup and FRP angle profile, FRP fan deck, etc. The basic material for prodcuing FRP part is resin and fiber glass. So it is high temperature resistance, anti-corrosion, high strength,anti-acid and anti-alkali. FRP part is used as ladder material, structure for the cooling tower or other proper construction. For more details, please kindly contact us, our engineer could reply all your confusions.

    Send Email Details
  • FRP Structural Members

    FRP Structural Members

    Fan Deck is one of the FRP Structural Members, it is used in the top of the cooling tower. It is made by FRP material with the extruding device. It is high-strenght, durable and anti-corrosion. For the FRP cooling tower, the cooling tower fan stack usually is intalled on the fan deck. The shape, size and color could been customized. If necessary, Latino could send our engineers to your site to design for you.

    Send Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy