-
Counterflow Sprayer Nozzle
This counterflow sprayer nozzle is made by ABS material. It is suitable for the counterflow cooling tower. The hot water flowing inside of the coils, which is enwrapped by outside water. The heat of water is transferred by coil when meet the outside water and air.The heat is been exhausted out of the cooling tower by the fan in the top of the cooling tower. And the water is collected back to the tank in the bottom of the cooling tower and will circulate continuously. This counterflow sprayer nozzle can distribute the water uniformly into the cooling tower fill and non-clogging.
Send Email Details -
Hot
Plastic Spray Nozzle For GEA Cooling Tower
This Plastic Spray Nozzle For GEA Cooling Tower is assembled by the nozzle body、orifice and the adaptor. You could choose the orifice and adaptor according to your request. This nozzle was connected with the distribution pipes by the stainless screw, its quality is durable.
Send Email Details -
Spray Nozzle for Cooling Tower
This Spray Nozzle for Cooling Tower is assembled by the nozzle body、orifice and the adaptor. You could choose the orifice and adaptor according to your request. This Spray Nozzle for Cooling Tower was connected with the distribution pipes by the stainless screw, its quality is durable.
Send Email Details -
Hot
Crossflow Spiral ABS Nozzle For Cooling Tower
The counterflow sprayer is an injection molded ABS spiral target nozzle, assembled by two parts-the main body and orifice cap. It is used in the crossflow cooling tower. The uniform water distribution is the main factor for maintaining cooling tower efficiency. Latino's spiral target spray nozzles ensure hot water distribute uniformly to the fill blocks. This nozzle are high-temperature resistant and non-clogging designed. Easy for installing、removing and replacing.
Send Email Details -
Hot
Cooling Tower Water Sprinkler Spray Nozzle
The Cooling Tower Water Sprinkler Spray Nozzle is made from ABS material, and assembled by several parts. The water flow from the distribution pipes to the coils and meet with the below plate, unformly distribute the water into the cooling tower fill. High cooling effect and non-clogging.
Send Email Details -
Hot
Cooling Tower Water Distribution PP Nozzles
This cooling tower water distribution nozzle is made from PP material and suitable for the crossflow cooling tower. It is flexible and reliable operation, and could been installed with the water plate, in this way it could overcome the phenomenon of floating water. Acid resistance, alkali resistance, wear resistance, high efficiency.
Send Email Details -
Hot
Industrial Counter Flow Water Cooling Tower PP Spray Nozzle System
This Spray Nozzle For Counter Flow Water Cooling Tower is made from ABS material. It has no internal parts as other nozzles. The below attached diffusion ring will not retain fibrous debris. The unique "Full cone" distribution pattern guarantee the uniform water distribution into the cooling tower fill blocks. It could provisde the uniform water distribution even near spray boundaries with minimal spray overlap. The diameter of water outlet is about 44mm, the outlet water pressure is very low water pressure and non-clogging.
Send Email Details -
Hot
Crossflow Cooling Tower Marley Sprial Spray Nozzle
The counterflow sprayer is an injection molded ABS spiral target nozzle, assembled by two parts-the main body and orifice cap. It is used in the crossflow cooling tower. The uniform water distribution is the main factor for maintaining cooling tower efficiency. Latino's spiral target spray nozzles ensure hot water distribute uniformly to the fill blocks. This nozzle are high-temperature resistant and non-clogging designed. Easy for installing、removing and replacing.
Send Email Details
