-
Industrial Liangchi ABS Spray Nozzle For Square Cooling Tower Price
Lower cost with long lifetime by PP material;
Send Email Details
Keep the water flow uniformly;
Non-clogging;
Easy cleaning;
NPT and BSP tread are available. -
Hot
Kingsun ABS Spray Nozzle For Square Cooling Tower Price
Lower cost with long lifetime by PP material;
Send Email Details
Keep the water flow uniformly;
Non-clogging;
Easy cleaning;
NPT and BSP tread are available. -
Hamon Cooling Tower Nozzle
Cooling Tower Nozzle made by PP materials which widely used on Hamon Brand Cooling Tower.
Send Email Details
The patented LATNO design provides excellent flow characteristics and a very uniform spray pattern,enhancing the cooling tower's thermal performance. -
Hot
Marley Cooling Tower Condenser Spray Nozzles
The Marley Cooling Tower Condenser Spray Nozzles is an injection molded polypropylene unit assembled by two parts—the main body with integral target diffuser and a snap-on insert or orifice cap.
Send Email Details
This Marley Cooling Tower Condenser Spray Nozzles is widely used in the crossflow cooling tower. -
Plastic Spray Nozzle For Cooling Tower
This plastic spray nozzle for cooling tower is made from ABS material. It has no internal parts as other nozzles. The below attached diffusion ring will not retain fibrous debris.
Send Email Details
The unique "Full cone" distribution pattern guarantee the uniform water distribution into the cooling tower fill blocks. It could provisde the uniform water distribution even near spray boundaries with minimal spray overlap.
The diameter of water outlet is about 44mm, the outlet water pressure is very low water pressure and non-clogging. -
Hot
Marley NS6 Cooling Tower Nozzle Condenser Spray Nozzles
Marley NS6 Cooling Tower Nozzle Condenser Spray Nozzles is suit for Marley counterflow cooling towers. It it is an other type of the Marley brand cooling tower nozzle which is a little same to NS5 cooling tower nozzle, and can replace the NS5 cooling tower nozzle.
Send Email Details
This cooling tower NS6 spray nozzle is made by PP material, which is suitable for the high temperature. -
Hot
Cooling Tower PP Nozzle
Cooling Tower PP Spray Nozzle is one kind of three-splash nozzles. The bottle-shaped interface in the bottom and the tapered nozzle is also followed with the coaxial spacing set in turn the outer diameter of the large splash plate.
Send Email Details
This cooling tower PP spray nozzle is corrosion-resistant, easy installment, it could offer multiple orifice options to optimize water distribution and cooling efficiency in the counter flow cooling towers. -
Hot
Cooling Tower ABS Spray Nozzle
This Cooling Tower ABS Spray Nozzle is one of three-splashed nozzles, which are made from ABS material.
Send Email Details
This spray nozzle is made by disposable injection molding, so it is suitable for the hydraulic load and can satify the needs of long-term safe operation of water distribution system.
It could distribute the water to the cooling tower fill uniformly by using the cross water distribution method, without the hollow phenomenon. -
Hot
Three Splash Nozzle
These Splash Nozzle is made from ABS material. It is widly used in the crossflow cooling tower.
Send Email Details
It connected with the pipes by the locking and anti-loosening device, so it could been connected with the water distribution pipe firmly and ensure the safe operation of the water distribution system in a long period.
The cooling effect is very perfect, it suit for the water cooling in power plant. -
Cooling Tower Sprinkler Head
Cooling Tower Sprinkler Head:
Send Email Details
Material:ABS/Aluminum
Size:1.5",2",2.5", 3'', 4'', 5'' ,6'', 8'', 10'', 12''
Holes number:4 ,6, 8, 10 -
Hot
Cooling Tower PP Spray Nozzle
This nozzle is made by PP or ABS. It could be distinguished into two type based on the tread standard.
Send Email Details -
Cooling Tower Nozzle
Uniform distribution of water is the main factor for maintaining the cooling tower efficiency. Latino's cooling tower nozzles ensure hot water distribution is uniform over the cooling tower fill blocks. These cooling tower nozzles are high-temperature resistant and non-clogging designed. Removing and replacing is relatively simple and does not need to stop the regular work for the cooling tower.
Send Email Details
This cooling tower nozzle is assebled by nozzle body、adaptor and orifice. All these three components are made from PP material. You could choose the suitable orifice depend on requirement.
