-
Cooling Tower Spray Nozzle Supplier
This cooling tower spray nozzle is made from PP material and suitable for the crossflow cooling tower.
Send Email Details
It is flexible and reliable operation, and could been installed with the water plate, in order to overcome the phenomenon of floating water.
Acid resistance, alkali resistance, wear resistance, high efficiency. -
Cooling Tower Spray Nozzle Manufacturer
This cooling tower spray nozzle is assembled by the nozzle body、orifice and the adaptor. You could choose the orifice and adaptor according to your request.
Send Email Details
This nozzle was connected with the distribution pipes by the stainless screw, its quality is durable. -
Hot
Rotating PP Spray Nozzle For Water Cooling Tower
Rotating PP Spray Nozzle For Water Cooling Tower is widely used in the cooling tower. This cooling tower PP spray nozzle is assembled by three parts, nozzle body, adaptor and orifice. And this cooling tower nozzle connected with the distribution pipe by the adaptor with thread. Latino could supply lots size of cooling tower spray nozzle to meet with different requirement for the cooling towers.
Send Email Details -
Hot
Cooling Tower NS6 Spray Nozzle
Cooling Tower NS6 Spray Nozzle is suit for Marley counterflow cooling towers. It it is an other type of the Marley brand cooling tower nozzle which is a little same to NS5 cooling tower nozzle, and can replace the NS5 cooling tower nozzle.
Send Email Details
This cooling tower NS6 spray nozzle is made by PP material, which is suitable for the high temperature. -
Hot
Industrial Counter Flow Water Cooling Tower PP Spray Nozzle System
This Spray Nozzle For Counter Flow Water Cooling Tower is made from ABS material. It has no internal parts as other nozzles. The below attached diffusion ring will not retain fibrous debris.
Send Email Details
The unique "Full cone" distribution pattern guarantee the uniform water distribution into the cooling tower fill blocks. It could provisde the uniform water distribution even near spray boundaries with minimal spray overlap.
The diameter of water outlet is about 44mm, the outlet water pressure is very low water pressure and non-clogging. -
Reflection Type Cooling Tower Spray Nozzle For Counter Flow Cooling Tower
This cooling towers spray nozzle is an efficient, non-clogging nozzle designed specifically for all counter flow cooling tower applications.
Send Email Details
This cooling tower nozzle is made by PP+ fiberglass, so it is high-temperature resistance and durable.
This cooling tower sprayer have varius size of orifice and adapetor to suit all kinds of flowing request of cooling towers. -
Hot
Crossflow Cooling Tower Marley Sprial Spray Nozzle
The counterflow sprayer is an injection molded ABS spiral target nozzle, assembled by two parts-the main body and orifice cap. It is used in the crossflow cooling tower.
Send Email Details
The uniform water distribution is the main factor for maintaining cooling tower efficiency. Latino's spiral target spray nozzles ensure hot water distribute uniformly to the fill blocks. This nozzle are high-temperature resistant and non-clogging designed.
Easy for installing、removing and replacing. -
Spiral ABS Nozzle For Marley Cross Flow Cooling Tower
The counterflow sprayer is an injection molded ABS spiral target nozzle, assembled by two parts-the main body and orifice cap. It is used in the crossflow cooling tower.
Send Email Details
The uniform water distribution is the main factor for maintaining cooling tower efficiency. Latino's spiral target spray nozzles ensure hot water distribute uniformly to the fill blocks. This nozzle are high-temperature resistant and non-clogging designed.
Easy for installing、removing and replacing. -
Hot
Flower Spray PP Nozzle Cooling Tower Target Nozzle
Flower Spray PP Nozzle Cooling Tower Target Nozzle is made from ABS material, and assembled by several parts.
Send Email Details
The water flow from the distribution pipes to the coils and meet with the below plate, unformly distribute the water into the cooling tower fill.
High cooling effect and non-clogging. -
Plastic Spray Nozzle For Marley Cooling Tower Maintenance
This plastic spray nozzle for cooling tower is made from ABS material. It has no internal parts as other nozzles. The below attached diffusion ring will not retain fibrous debris.
Send Email Details
The unique "Full cone" distribution pattern guarantee the uniform water distribution into the cooling tower fill blocks. It could provisde the uniform water distribution even near spray boundaries with minimal spray overlap.
The diameter of water outlet is about 44mm, the outlet water pressure is very low water pressure and non-clogging. -
Hot
PP NS5 Spray Nozzle For Marley Cooling Tower Maintenance
This plastic spray nozzle for cooling tower is made from ABS material. It has no internal parts as other nozzles. The below attached diffusion ring will not retain fibrous debris.
Send Email Details
The unique "Full cone" distribution pattern guarantee the uniform water distribution into the cooling tower fill blocks. It could provisde the uniform water distribution even near spray boundaries with minimal spray overlap.
The diameter of water outlet is about 44mm, the outlet water pressure is very low water pressure and non-clogging. -
Hot
Cooling Tower ABS Nozzle
This cooling tower ABS nozzle is made from ABS material. It is widly used in the crossflow cooling tower.
Send Email Details
It connected with the pipes by the locking and anti-loosening device, so it could been connected with the water distribution pipe firmly and ensure the safe operation of the water distribution system in a long period.
The cooling effect is very perfect, it suit for the water cooling in power plant.
