-
Cooling Tower Fill Film
The fills are suitable of any induced draft or natural draft cooling tower using normal industrial water quality. Sharp horizontal corrugations allow even water redistribution on the sheet and water rotation for good contact with air. The offset flute design allows vertical rotation of air with limited pressure drop. Hanging design type or glue sticked type are available.
Send Email Details -
Hot
PVC Fill Replacement For Cooling Tower
LATINO-9615 Cross-Fluted high-density film fill desinged for cooling of power plant, petrochemical HAVC and other process cooling towers. The fill shall be fabricated from regrid, corrugated PVC sheets and are conducive to cooling water and UV protected. The media modules shall be fabricated from PVC sheets of quality stated above and completely corrugated at an angle of 60 degrees from the horizontal to form a cross-corrugated pattern between adjacent sheets providing a continuous and horizontal redistribution of air and water. The flute height for each corrugation shall be 20mm.
Send Email Details -
Hot
Cooling Tower Fills Type
This cooling tower fill is widely used in counter flow cooling towers. Easy to installation. High heat exchange efficiency, small wind resistance, no-easy plugged. PVC, PP material are both available. Customers can choose according to cooling media temperature.
Send Email Details
