Cooling Tower Drift Eliminators

This Cooling Tower Air Inlet Louver With Frame is used principally in situations of counterflow and crossflow applications: it is assembled by the preformed PVC sheets.

The PVC raw material is available for temperatures up to + 80 ° C.

This type of eliminator is easy for installation and maintenance. This type of PVC drift eliminator can also be supplied cut-to-size or indeed as a circular section.

This Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower is made from PVC material, and glued by PVC sheets into block.

Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower function is capture water droplets in the air stream to reduce the water loss. It is widely used in the counterflow and crossflow cooling tower.

Latino's Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower is designed to remove the maximum entrained drift particles from the air stream efficiently, with the minimum pressure drop, so that it could reduce the fan power requirement.

This drift eliminator were installed by the sinusoidal wave blade、wave spacer and PP spacer. This drift eliminator were widely used in the top of the counterflow and crossflow cooling tower, and its function is to separate the droplets in the airflow.

This drift eliminator could provides extra stiffness for long spans with minimum deflection. The wave spacer could secure wave sections uniformly at a finxed interval to improve stability and blocks that holds the assembled block grid securely. It could been installed fastly and efficiently. Block can be easily cleaned when necessary.

Marley Cooling Tower Drift Eliminators is a nesting cellular PVC type design.
This Marley cooling tower drift eliminator is a more advanced design which meets or exceeds today’s demanding specifications for drift emissions without sacrificing fan horsepower.

This Cooling Tower Rectangular Mist Eliminator is constructed from preformed rigid PVC sheets, subsequently made up into blocks. It is widely used in the evaporative towers, scrubbers and gas turbines. Because of the best quality for the PVC raw material, this mist eliminator is resistance to the environmental effects (such as UV radiation).

Due to the handy form, this mist eliminator is easy for the installment and maintance. And this mist eliminator is easy to been installed by any size, such as the round one.

Mist Eliminator function is remove entrained particles from airflow steam efficiently, with the minimum pressure drop,thereby reducing the fan power requirement when the air passes through the Mist Eliminator.

This Cooling Tower Air Inlet Louvers is made from PVC material. It is designed to remove the maximum water droplets from air stream efficiently, with the minimum pressure drop, and so it could reduce the fan power requirement.

It could been installed with or without the frame according to your usage.

The main advantages for this air inlet is light weight with competitive price.

This High Efficiency Drift Eliminator is made from rigid PVC material, then glued into blocks. The size could be customized.

Latino's High Efficiency Drift Eliminator has more advanced design which meets or exceeds the demanding specifications for drift emissions without sacrificing the power of the fan. So the drift rates could been reduced a lot with equivalent pressure drop.

It could been installed and cleaned very easily. It could been used in the counterflow and crossflow cooling tower.

This air inlet louver for cooling tower were installed by the sinusoidal wave blade and wave spacer. This air inlet louver for cooling tower were widely used in the top of the counterflow and crossflow cooling tower, and its function is to separate the droplets in the airflow.

This cooling tower air inlet louvers could provides extra stiffness for long spans with minimum deflection. The wave spacer could secure wave sections uniformly at a finxed interval to improve stability and blocks that holds the assembled block grid securely. It could been installed fastly and efficiently. Block can be easily cleaned when necessary.

This air inlet louver for cooling tower could supply in any length, the wave blade and wave spacer were made by PVC and PP separately.

This Cooling Tower Air Inlet Louvers is made from PVC material. It is designed to remove the maximum water droplets from air stream efficiently, with the minimum pressure drop, and so it could reduce the fan power requirement.

It could been installed with or without the frame according to your usage.

The main advantages for this air inlet is light weight with competitive price.