cooling tower replancement

  • Cooling Tower PVC Filler

    Cooling Tower PVC Filler

    The Cooling Tower PVC Filler is probably the most thermally efficient fill worldwide, has proven its efficiency for more than 30 years. The sharp horizontal corrugations of cooling tower PVC filler allow even water redistribution on the sheet and water rotation for good contact with air. The offset flute design allows vertical rotation of air with limited pressure drop. This type of cooling tower fill well adapted to any induced draft or natural draft cooling tower using normal industrial water quality.

    Email Details
  • Hot
    Best Price Films PVC Fill Packing For Cooling Tower

    Best Price Films PVC Fill Packing For Cooling Tower

    The cross-fluted Fill manufactured by LATINO Environmental and has been widely used in the counter flow cooling tower. The Fill material is PVC sheet which shall be prime, rigid PVC conforming to ASTM Standard, the fill process are by vaccum thermoforming process, so the corrugated are clearly and stable. The fill pitch is 12mm or 19mm based on the client requirment, and the height can be 305mm, 610mm, 915mm and 1210mm, the length can be customized.

    Email Details
  • Hot
    Cooling Tower Fill Sheet

    Cooling Tower Fill Sheet

    This type of cooling tower Fill is widely used as well in mechnical draft cooling tower, nature draft cooling tower and Air-condition cooling tower. Cooling tower sheet fill or media, the fill are selected for direct replacement, performance enhancement , and water condition compatibility. Each fill has performance characteristics that allow selections to be made for various heat loads, flow rats, water quality and horse power combinations.

    Email Details
  • Cooling Tower Fill Media Products

    Cooling Tower Fill Media Products

    The Cooling Tower Fill Media Products is probably the fill offering the hightest resistance to scaling and fouling worldwide; Using LATINO's well proven technology of the non-contact sheets, this is a vertical core fill design with wide openings. The sheets are smooth and include a large number of square holes. The holes induce beneficial turbulence for the heat transfer, whilst no fouling or scaling occurs on the support. The laths (resulting from perforation) make this packing acting partly like a grid type. Therefore, it is an excellent alternative to « mesh » or « 3D grids ». It can be produced in PP.

    Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy