drift eliminator for heavy industrial

This Cooling Tower Air Inlet Louver With Frame is used principally in situations of counterflow and crossflow applications: it is assembled by the preformed PVC sheets. The PVC raw material is available for temperatures up to + 80 ° C. This type of eliminator is easy for installation and maintenance. This type of PVC drift eliminator can also be supplied cut-to-size or indeed as a circular section.

This PVC Cellular Air Inlet Louvers For Cooling Tower is made from raw PVC material. It could resist the UV and radiation. For this cooling tower drift eliminator, the discharge angle is very important to ensure two different eliminator designs, for the counterflow and crossflow towers. A lot of tests prove that the air direction leaving the eliminator is extremely important, the imperfect designs add the additional work for the fan in the cooling tower. This drift eliminators need little or no maintenance. If it need to been cleaned, be carefully for the physically damage the PVC eliminator blocks. For loose silt, fibers and so on, you could use a water spray, but need to ensure that the spray nozzle is kept continually flowing and the water pressure is under 30 PSI.