Cooling tower fill replacement

  • Cooling Tower Fill Media

    Cooling Tower Fill Media

    The fill is widely used in crossflow cooling tower. This cooling tower fill spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow. LATINO has been present on the oversea market for over 30 years. Thanks to the experience it acquired over the years, its range of products now include more efficient cooling tower filling system in terms of heat exchange and thermo-mechanical resistance. Prior to thermoforming, our PVC is provided by our own factory and also has been supplying it to the international companies, it meets the American surface burning characteristics of building material standards, CTI 136 and ASTM E-84.

    Email Details
  • Hot
    Counterflow Natural Draft Cooling Tower Fill Replacement

    Counterflow Natural Draft Cooling Tower Fill Replacement

    The vertical-flute fill is probably the most thermally efficient fill worldwide. Using this well proven technology of the non-contact sheets has an offset flute design. Sharp horizontal corrugations allow even water redistribution on the sheet and water rotation for good contact with air. The offset flute design allows vertical rotation of air with limited pressure drop. It is well adapted to any induced draft or natural draft cooling tower using normal industrial water quality. This fill has proven its efficiency for more than 25 years.

    Email Details
  • High temperature resistance cooling tower net splashing fill

    High temperature resistance cooling tower net splashing fill

    High temperature resistance cooling tower net splashing fill have been specially designed for medium to strongly polluted cooling water, it focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily cleaned. Features: 1) Products suitable for inferior water qualities 2) Chemical and high temperature resistance of Polypropylene 3) High stability 4) Cleaning with high pressures cleaners possible 5) Long service life 6) Impact resistant 7) Environmentally friendly 8) Economical installation

    Email Details
  • Hot
    Cooling tower PP fill manufacture with high temperature resistance

    Cooling tower PP fill manufacture with high temperature resistance

    The Net fill (Non-glued assembly fill) have been specially designed for medium to strongly polluted cooling water, it focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily cleaned. The Net grid packings are high-performance fills which provide an optimized pressure drop. Features: 1) Products suitable for inferior water qualities 2) Chemical and high temperature resistance of Polypropylene 3) High stability 4) Cleaning with high pressures cleaners possible 5) Long service life 6) Impact resistant 7) Environmentally friendly 8) Economical installation

    Email Details
  • Cooling Tower PVC Filler

    Cooling Tower PVC Filler

    The Cooling Tower PVC Filler is probably the most thermally efficient fill worldwide, has proven its efficiency for more than 30 years. The sharp horizontal corrugations of cooling tower PVC filler allow even water redistribution on the sheet and water rotation for good contact with air. The offset flute design allows vertical rotation of air with limited pressure drop. This type of cooling tower fill well adapted to any induced draft or natural draft cooling tower using normal industrial water quality.

    Email Details
  • Hot
    Cooling Tower PVC Replacement

    Cooling Tower PVC Replacement

    This type of Fill is widely used in counterflow of cooling tower in power plant, petrochemical, HVAC and other process cooling towers. The Fill have vertically offset flutes arranged in a straggered pattern with adjacent sheets providing a continuous and horizontal redistribution of air and water. The flut height for each corrugation shall be 20mm.

    Email Details
  • Cooling Tower Replacement PVC Fills

    Cooling Tower Replacement PVC Fills

    This type fill of Cleanflow Plus is the Optimized thermal-fouling film fill by increasing its thermal performance whilst retaining its fouling resistance. Using this fill well proven technology of the non-contact sheets it is a vertical flute design. It uses the same smooth horizontal corrugations allowing even water redistribution over the sheet and water rotation for good contact with air whilst resisting deposition of solids. The vertical flute design allows self drainage of the cores and reduces the pressure drop. It is well adapted to any Induced or Natural draft cooling tower using poor industrial water quality, in particular sea water. This type fill has been proving its capability for more than 20 years.

    Email Details
  • Hot
    Best Price Films PVC Fill Packing For Cooling Tower

    Best Price Films PVC Fill Packing For Cooling Tower

    The cross-fluted Fill manufactured by LATINO Environmental and has been widely used in the counter flow cooling tower. The Fill material is PVC sheet which shall be prime, rigid PVC conforming to ASTM Standard, the fill process are by vaccum thermoforming process, so the corrugated are clearly and stable. The fill pitch is 12mm or 19mm based on the client requirment, and the height can be 305mm, 610mm, 915mm and 1210mm, the length can be customized.

    Email Details
  • Hot
    Cooling Tower Fill Sheet

    Cooling Tower Fill Sheet

    This type of cooling tower Fill is widely used as well in mechnical draft cooling tower, nature draft cooling tower and Air-condition cooling tower. Cooling tower sheet fill or media, the fill are selected for direct replacement, performance enhancement , and water condition compatibility. Each fill has performance characteristics that allow selections to be made for various heat loads, flow rats, water quality and horse power combinations.

    Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy