cooling tower parts

  • Cooling Tower PVC Filler

    Cooling Tower PVC Filler

    The Cooling Tower PVC Filler is probably the most thermally efficient fill worldwide, has proven its efficiency for more than 30 years. The sharp horizontal corrugations of cooling tower PVC filler allow even water redistribution on the sheet and water rotation for good contact with air. The offset flute design allows vertical rotation of air with limited pressure drop. This type of cooling tower fill well adapted to any induced draft or natural draft cooling tower using normal industrial water quality.

    Email Details
  • Hot
    Cooling Tower PVC Replacement

    Cooling Tower PVC Replacement

    This type of Fill is widely used in counterflow of cooling tower in power plant, petrochemical, HVAC and other process cooling towers. The Fill have vertically offset flutes arranged in a straggered pattern with adjacent sheets providing a continuous and horizontal redistribution of air and water. The flut height for each corrugation shall be 20mm.

    Email Details
  • Hot
    Special Cooling Tower Drift Eliminator

    Special Cooling Tower Drift Eliminator

    LATINO’s drift eliminators are specifically designed to achieve maximum drift removal efficiency in both crossflow and counterflow tower applications with various product options available to minimize pressure drop, drift loss, cost, or a combination of all three.

    Email Details
  • Hot
    Cooling Tower PVC Fills

    Cooling Tower PVC Fills

    The Cleanflow film fill is qualified worldwide as the best film fill combining low fouling properties with good thermal performance。 Using LATINO’s well proven technology of non-contact sheets, which combined with smooth horizontal corrugations, allows even water distribution over the sheet and water rotation for good contact with air and resistance to deposition of solids. The vertical flute design allows self drainage of the cores and reduces the pressure drop. It is well adapted to any induced draft or natural draft cooling tower using poor quality industrial water particularly sea water. It is also suitable for other severe applications such as laminated decanting and washing gas. The CLEANFLOW fill has been proving its capability for more than 20 years.

    Email Details
  • Hot
    Best Price Films PVC Fill Packing For Cooling Tower

    Best Price Films PVC Fill Packing For Cooling Tower

    The cross-fluted Fill manufactured by LATINO Environmental and has been widely used in the counter flow cooling tower. The Fill material is PVC sheet which shall be prime, rigid PVC conforming to ASTM Standard, the fill process are by vaccum thermoforming process, so the corrugated are clearly and stable. The fill pitch is 12mm or 19mm based on the client requirment, and the height can be 305mm, 610mm, 915mm and 1210mm, the length can be customized.

    Email Details
  • Hot
    Cooling Tower Fill Sheet

    Cooling Tower Fill Sheet

    This type of cooling tower Fill is widely used as well in mechnical draft cooling tower, nature draft cooling tower and Air-condition cooling tower. Cooling tower sheet fill or media, the fill are selected for direct replacement, performance enhancement , and water condition compatibility. Each fill has performance characteristics that allow selections to be made for various heat loads, flow rats, water quality and horse power combinations.

    Email Details
  • Counterflow Cooling Tower Fill

    Counterflow Cooling Tower Fill

    Counterflow Cooling Tower Fill is qualifided worldwide as the best film fill combining low fouling properties with good thermal performance.And the fill sheets can be glued to block or suspension by rod. It is adapted to counterflow cooling tower normal using quality industrial water.It is also suitable for other severve application,such as lamin]ated decanting and washing gas.

    Email Details
  • Hot
    PVC Fill Replacement For Cooling Tower

    PVC Fill Replacement For Cooling Tower

    LATINO-9615 Cross-Fluted high-density film fill desinged for cooling of power plant, petrochemical HAVC and other process cooling towers. The fill shall be fabricated from regrid, corrugated PVC sheets and are conducive to cooling water and UV protected. The media modules shall be fabricated from PVC sheets of quality stated above and completely corrugated at an angle of 60 degrees from the horizontal to form a cross-corrugated pattern between adjacent sheets providing a continuous and horizontal redistribution of air and water. The flute height for each corrugation shall be 20mm.

    Email Details
  • Fill Replacement

    Fill Replacement

    The cooling tower fill is widely used in counter flow cooling tower, and also can produces a wide range of synthetic filling systems for evaporative or cooling towers to purify water and to treat process gas fumes. LATINO has been present on the oversea market for over 30 years. Thanks to the experience it acquired over the years, its range of products now include more efficient cooling tower filling system in terms of heat exchange and thermo-mechanical resistance. Prior to thermoforming, our PVC is provided by our own factory and also has been supplying it to the international companies, it meets the American surface burning characteristics of building material standards, CTI 136 and ASTM E-84.

    Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy