-
Hot
Crossflow Cooling Tower PVC Fill Material
Crossflow Cooling Tower PVC Fill Material plays a crucial role in improving the lifespan of the cross flow cooling tower. It also could increases the water flow process remarkably for better performance and efficiency as well.
Send Email Details
This Crossflow Cooling Tower PVC Fill Materialis glued together by A type and B type sheets to be a block which is stalled in tower.
This PVC fill use the modified PVC sheet and is manufactured with a unique modified formula to enable strong resistance and guarantee its durability. It involves special processing whereby the inner side edge is integrated with a liquid baffle plate which controls the drift loss of water. -
Hot
Cooling Tower Fills Manufacturers
Cooling Tower Fills Manufacturers is widely used in the counter flow cooling towers, the product is a cellular block after gluing into cooling tower fill blocks, according to the interval size of the cooling tower bracket, cut into different sizes. Easy to installation. High heat exchange efficiency, small wind resistance, no-easy plugged. PVC, PP material are both available. Customers can choose according to cooling media temperature.
Send Email Details -
Cooling Tower Fills Supplier
This Cooling Tower Fills design with the maximum air and water flow with self-extinguishing PVC material, the high temperatures up to 55°.
Send Email Details
This type fill is for BAC VXT/VTL Cooling towers, can guaranteed original performance. -
Cooling Tower Fill Film Black PVC Fill Pack
This industry cooling tower fill is suit for metric cooling tower. This fill should be fabricated from rigid, corrugated PVC sheets that are conducive to cooling water and UV protected. The froming process of fill is by vacuum thermofroming.
Send Email Details
Compare with the other PVC fill, it allows for high water velocity, improve the water distribution and thermal mixing.
This industry cooling tower fill is well adapted to any induced draft or natural draft cooling tower using normal industrial water quality. -
Hot
Cooling Tower PP Fill
High performance polypropylene cooling tower fill.
Send Email Details
The fill material is PP and the operation temperature can be 90℃；
Polypropylene is rapidly replacing the standard PVC fill in cooling towers due to its superior quality.
LATINO PP fill is suitable to replace all major standard and high performance PVC fill and delivers equal or better performance but will outlast the PVC fill. -
Fill Replacement
The cooling tower fill is widely used in counter flow cooling tower, and also can produces a wide range of synthetic filling systems for evaporative or cooling towers to purify water and to treat process gas fumes.
Send Email Details
LATINO has been present on the oversea market for over 30 years. Thanks to the experience it acquired over the years, its range of products now include more efficient cooling tower filling system in terms of heat exchange and thermo-mechanical resistance. Prior to thermoforming, our PVC is provided by our own factory and also has been supplying it to the international companies, it meets the American surface burning characteristics of building material standards, CTI 136 and ASTM E-84. -
Hot
PVC Film For Cooling Tower
The PVC Film For Cooling Tower is widely used in from small cooling towers to large cell and natural draught cooling towers;
Send Email Details
Excellent heat and mass transfer ;
High resistance to erosion
Self supporting structure
Flexibility in material and dimensions
Long service life -
Hot
Counterflow Natural Draft Cooling Tower Fill Replacement
The vertical-flute fill is probably the most thermally efficient fill worldwide.
Send Email Details
Using this well proven technology of the non-contact sheets has an offset flute design. Sharp horizontal corrugations allow even water redistribution on the sheet and water rotation for good contact with air. The offset flute design allows vertical rotation of air with limited pressure drop.
It is well adapted to any induced draft or natural draft cooling tower using normal industrial water quality.
This fill has proven its efficiency for more than 25 years. -
Cooling Tower PP Grid Fill
The grid fill is the result of an extensive optimization of the lath width, the blockage area ratio and the lath layout;
Send Email Details
The water droplets, splashing on a well drained lath, break in a large number of very small droplets, inducing large heat exchange surface. Blockage area ratio and lozenge layout is the optimized compromise between the pressure drop and the probability of large droplets to hit the laths.
The laths height has been selected to transfer the load to the supporting spacers using minimum material quantity.
It may be used as well in Counterflow as in Crossflow cooling towers, mechanical or natural draft.
It is well adapted to any water quality, even without water treatment, when the fouling risk cannot be determined, in particular with seawater -
Hot
High Temperature Resistance PP Cooling Tower Fill
Inclined tube is mainly used for water supply and drainage engineering of the inlet sand removal, industrial and domestic water sedimentation, sewage sedimentation, grease and tailing thickening processing, can also be used for the old pool.Main features: wet weeks, hydraulic radius is small, laminar flow, particle precipitation from flocculating flow interference.
Send Email Details -
Hot
Competitive Price Cooling Tower Infill
Competitive Price Cooling Tower Infill is one of the most important components for exchange of air and water in the cooling tower. It is the major parts to improve the efficiency of cooling effect and ensure the economy and safe operation for the cooling tower. With the development of the plastic industry, counter flow cooling tower PVC fill with "S" wave, inclined corrugated fills, which has the heat dissipation, durable, good performance, ventilated small resistance, based on the easy insalling and cleaning and other advantages. Cooling tower PVC fill is widely used in different types of cooling towers.
Send Email Details -
Customized Rigid PVC Film for Cooling Tower Fill
Customized Rigid PVC Film for Cooling Tower Fill is ultra-high molecular PVC plastic based with several kinds of materials, such as intensifier, UV absorber, processing aid, light-stabilizer and cold-resistant agent, etc and produced by advanced calendaring techniques. 0.3mm 0.4mm Rigid Black Flat PVC Sheet Roll for Cooling Tower Fill is 78ºC above heat-resistant and -20ºC below cold-resistant. Oxygen transmission is up to over 33%. It is characterized by low carbon, environment-protected and can be used for more than 15 years.
Send Email Details
